13
12
OP1-20-DE
TEIL 8 ― PROBLEMLÖSUNG
Anleitung zur Verwendung des Reparaturpflasters
(Kleine Einstichlöcher und undichte Stellen können mit dem beiliegenden Reparaturpflaster ausgebessert werden.)
a) Machen Sie die undichte Stelle ausfindig.
b) Lassen Sie die Luft ab.
c) Reinigen und trocknen Sie den Bereich um die undichte Stelle.
d) Nehmen Sie das Reparaturplaster aus seiner Verpackung, schneiden Sie es auf die erforderliche Form und Größe zu (das
Pflaster sollte größer als die undichte Stelle sein), setzen Sie das Pflaster auf die undichte Stelle und drücken Sie es fest an.
e) Lassen Sie die geflickte Stelle für mindestens 30 Minuten an der Luft trocknen.
Bei einer größeren Beschädigung empfehlen wir die Verwendung eines Silikon- oder Kautschukklebers für die Reparatur.
Anleitung zur Verwendung des Reparaturklebers
1. Machen Sie die undichte Stelle ausfindig.
2. Lassen Sie die Luft ab (sofern nötig) und leeren Sie den Pool vollständig.
3. Reinigen und trocknen Sie den Bereich um die undichte Stelle.
4. Reinigen Sie den Bereich um die undichte Stelle gründlich. Schneiden Sie ein rundes Stück des Reparaturmaterials zu, das
größer als die undichte Stelle sein sollte.
5. Tragen Sie Klebstoff auf eine Seite des Reparaturmaterials auf (Klebstoff muss separat erworben werden). Achten Sie bitte
darauf, den Klebstoff gleichmäßig auf den Reparaturmaterial aufzutragen.
6. Setzen Sie das Material auf die undichte Stelle und drücken Sie ihn fest an. Lassen Sie die geflickte Stelle 12 Stunden trock
-
nen. Tragen Sie nach dem Trocknen für eine vollständige Versiegelung Klebstoff um den Rand des Flickens auf (4 Stunden
trocknen lassen), bevor Sie den Pool einlagern.