Contents
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 23
Technical features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 23
- Climatic condition
- Reference standard
Power supply unit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 24
Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 25
- Connection/disconnection/partial connection
- Ordinary operation
- Test state
- Alarm due to intrusion
- Alarm due to tampering
- 24-hour alarm state
- Scanner alarm state
Description of the front panel and signals
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 28
Peripheral units of the system
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 29
- Remote control for connecting, disconnecting and partially connecting the system
- Remote control to start robbery and panic alarms
- P-IR detector
- Multi-function door-window detector
- Remote indicator of system state
- Outdoor self-powered wireless siren
Mains and battery connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag. 39
Connection terminal board and operation diagram
. . . . . . . . . . . . . . . . . . . . . . . . pag. 39
DIRECTIONS
The products must be sold in their original packing. Where this is not the case, the retailer and/or
the installer must apply and transmit the instructions for use supplied with the product to the user.
After opening the packing, check the product’s ntegrity; in case of doubt, do not use the equip-
ment and consult skilled personnel. Even when wrapped in its packing, the equipment must be
handled with care and stored in a dry room at a temperature between –5 and +40°C.
Remember:
• Before working on the system, turn off the voltage by pressing the main switch.
• To avoid a reduction in the insulation distances between terminals, carefully prepare the
cableheads to be inserted into the terminals of the device.
• In order to avoid overheating which could cause a fire or damage the cables, tighten the termi-
nal screws carefully.
• If not otherwise indicated, the product must be used in dry rooms free of dust.
Use specific products for special environments.
- 22 -
G
C.369 31-05-2002 16:55 Pagina 22
