Avaya XBU48, Инструкция по установке и эксплуатации, Страница: 11 / 20

INSTALLATION
Avaya
t
XBU48 Site Preparation, Installation and Operator’s Manual
S
700071244 Issue 3
7
7. Align the U-shaped mounting bracket with the two holes closest to
the front of the XBU48 and secure using two of the countersink
screws from the start-up kit.
8. Align the L-shaped mounting bracket with the two holes closest to
the rear of the XBU48 and secure using two of the countersink
screws from the start-up kit.
NOTE The vertical section of the L-bracket must be to the left of the UPS.
9. Place the UPS on top of the XBU48, aligning the mounting brackets
with the holes on the sides of the UPS chassis. Secure the brackets
to the UPS using the six supplied screws.
Figure 3. Maximum Configuration (UPS with Three XBU48s)