Avaya Session Border Controller for Enterprise Скачать руководство пользователя страница 72

Страница: 72 / 78

License feature

Description

FEAT_SBCE_HIGHAVAILABILITY
_CONFIG

Specifies the configuration of HA for the setup.

License installation

You can install Avaya SBCE license on either of the following servers:

• The WebLM server on System Manager

• The local WebLM server

Installing a license on WebLM server on System Manager

Before you begin

Get the license file from the Avaya Product Licensing and Delivery System (PLDS) website at

https://plds.avaya.com/

About this task

If you experience problems while installing the license file, see the License file installation errors

section in

Administering standalone Avaya WebLM

Procedure

1. Log in to the System Manager web interface.

2. On the home page, in the

Services

section, click

Licenses

3. In the left navigation pane, click

Install license

4. Browse to the location where you saved the license file, and select the file to upload.

5. Click

Install

6. Verify that the license is installed. If the installation is successful, a new menu item named

ASBCE appears in the left navigation pane. Click

ASBCE

to view the licensed features.

Installing a license file on the local WebLM server

Procedure

1. Log in to the WebLM application. If you are logging in for the first time, the default username

admin

and the default password is

weblmadmin

. The system prompts you to change the

default password.

2. In the left navigation pane, click

Install License

The system displays the Install License page.

Licensing requirements

Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Содержание Session Border Controller for Enterprise















































































Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы:

Avaya Session Border Controller for Enterprise, Руководство пользователя, Страница: 72 / 78

Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы: