Avaya Session Border Controller for Enterprise Скачать руководство пользователя страница 48

Страница: 48 / 78

Chapter 6: Installation

Read through the information in this chapter thoroughly before attempting to install, provision, or
remove the Avaya SBCE server.

About installation

Installation of the Avaya SBCE server comprises the following steps:

1. Mounting the server to an equipment rack or on an electrically grounded table-top.
2. Connecting the server to the existing network.
3. (Optional) For installation by using a DVD, downloading the iso from PLDS. The file format is

sbce-6.3.xxx-xx-xxxx.iso

For installation by using a USB device, download the img file from PLDS.

4. (Optional) Installing the Avaya SBCE software if not preinstalled.

Note:

You can install using a serial connection or a VGA connection. Use the VGA connection to

connect a monitor and keyboard to the system. If not, use a serial port. Amax EMS requires

VGA and PS2 keyboard.

Avaya SBCE supports multiple methods of installation, such as ISO-based DVD/ USB/ NFS/

PXE.

Mounting the server to an equipment rack

The Avaya SBCE server can be installed either in a standard 19” equipment rack or placed free-
standing on an equipment tabletop.

Note:

For information about mounting the Avaya SBCE server, see

Rack Installation Guide

Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Содержание Session Border Controller for Enterprise















































































Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы:

Avaya Session Border Controller for Enterprise, Руководство пользователя, Страница: 48 / 78

Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы: