The options are:
• 1-configure: Command line mode
• 2-configure: Text mode
• 3-Reboot SBCE
• 4-Shutdown SBCE
4. Select option 2 for text mode.
5. Press
Enter
.
The system displays a message that instructs you to select
Yes
to proceed or
no
to exit.
6. Select
Yes
to proceed.
The system displays a message box that indicates
Installing as a EMS device
.
7. Press
Enter
.
The system displays the Device Configuration screen with the following options: EMS
Configurations and EMS Operations.
Caution:
The
EMS Operations
option is used to reset the EMS operating software to the factory
default state. This option is permanently deletes all system configuration information and
cannot be undone. DO NOT select this option unless that is the operation you want to
perform.
8. Select the
EMS Configuration
option.
9. Press
Enter
.
The system displays the top-level EMS Configuration screen.
10. If not already selected by default, use the arrow keys to select the
Installation Type
option,
and press
Enter
.
The system displays another configuration screen with two options: Primary and Secondary.
11. Select
Primary
and press
Enter
.
The system displays the top-level configuration screen.
12. To deploy the standby EMS, select the
Secondary
option.
13. Use the arrow keys to select the
EMS Appliance Configuration
option, and press
Enter
.
The system displays the Appliance Configuration screen.
14. Enter the required information in the appropriate fields.
The value entered for network passphrase is used during Avaya SBCE configuration. For
more information, see EMS Appliance Configuration screen field descriptions.
15. Press
Enter
.
The system displays the top-level configuration screen.
Avaya SBCE configuration
60
Deploying Avaya SBCE
August 2015