Prerequisites:
• Check the status of the TTY port 1 using LD 37. If it is enabled, disable it.
• Ensure PCML and PMSI settings are configured accordingly in LD 17.
Procedure
1. At a command prompt, type
LD 17
and press
Enter
.
2. At the
REQ
prompt, type
CHG
and press
Enter
.
3. At the
TYPE
prompt, type
PARM
and press
Enter
.
4. Press
Enter
until the system displays the
PCML
prompt.
5. Type
MU
or
A
, depending on the region you are in, and press
Enter
.
If you are in the NA/CALA region, type
MU
. If you are in the EMEA/APAC region,
type
A
.
6. Press
Enter
until the system displays the
PMSI
prompt.
7. Type
YES
and press
Enter
.
8. At the
MANU
prompt, type
PMS1
and press
Enter
.
9. At the
PMCR
prompt, press
Enter
.
10. At the
PORT
prompt, enter the PTY port number created in
on page 31.
11. Press
Enter
until the system displays the
REQ
prompt.
12. Type
****
and press
Enter
to exit.
Configuring PMSI login with UCM on Security Domain
About this task
Use this procedure to configure PMSI login with UCM on Security Domain.
Procedure
1. Log in to UCM with the admin username and password.
2. Click
Administrative Users
.
3. Click
Add
to add a new user.
The username should be same as PTY built for PMS.
4. Type the password.
Configuring PMSI login with UCM on Security Domain
Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012 33
