Avaya G860, Установка и эксплуатация

Страница: 87 / 214

Issue 1 October 2007 87
9. Configuring System Controller Software for the First Time
>>> Copy Project/Downloads/dat_files/* file to /tftpboot ...
>>> Backup original versions of /tftpboot files ...
**************************************
* IF CONFIGURATION IS DONE OK *
* YOU MUST REBOOT THE SC !!!!!!!!!!! *
**************************************
2. The script warns you not to reboot this SC until installation of second SC is
already done, even though this is the configuration for the second SC board.
Now that the installation of both the first and second SC boards are complete,
reboot the SC board by entering y at the Reboot prompt or accept the default.
3. Confirm the Reboot by entering y at the prompt or accept the default.
IMPORTANT: If you have second SC, DO NOT REBOOT this SC until
installation of second SC already done !!!
Reboot both SCs at the same time.
Do REBOOT now (n/y) [y]:
y
Are you sure (n/y) [y]:
y
The software files are updated and commence operating automatically.
9.6 VLANs, Interface Separation & Link Aggregation
The Avaya G860 Media Gateway is provided with the following default settings:
„
Single Interface
„
No Aggregation
„
VLANs Disabled