Avaya G860, Установка и эксплуатация

Страница: 144 / 214

144 Installation & Operation Manual
Avaya G860 Media Gateway
Master SC IP address [0.0.0.0]:
10.1.1.1
8. At the Redundant SC IP address prompt, enter the internal IP address of the
standby SC board.
Redundant SC IP address (or 1.1.1.1 if none) [0.0.0.0]:
10.6.8.29
9. At the EMS server prompt, enter the IP address of the EMS server or MIB
Browser server. For the Second EMS server (which is not applicable), accept the
default of no IP address
EMS server [0.0.0.0]:
10.6.1.8
10. At the NTP server IP prompt, enter the IP address of the NTP server.
NTP server IP [10.2.229.57]:
11. At the Enable Security prompt, to enable security, enter 1. To disable Security,
enter 0. For more information, refer to 'About Security in the Avaya G860 Media
Gateway' on page
110 .
Enable Security (0-no, 1-yes) [0]:
12. You are prompted to enter the SC Root Password and the passwords for SNMP
Read and Write Community. To leave a password unchanged, press
Enter . To
change a password, enter the new password. It must be at least 4 characters.
You are prompted to re-enter the new password.
The default passwords are:
•
SC Root - root
•
SNMP Read Community -
public
•
SNMP Write Community -
private
Note: For security reasons, it is recommended to change these passwords and
make a note of the new passwords you enter for future reference.
SC Root Password [leave unchanged]: ******
SNMP Read Community [leave unchanged]: ******
SNMP Write Community [leave unchanged]: ******