Avaya G860, Установка и эксплуатация

Страница: 186 / 214

186 Installation & Operation Manual
Avaya G860 Media Gateway
Table 41: Avaya G860 Media Gateway Technical Specifications
Function Specification
PSTN Signaling
DTMF per TIA 464B
DTMF over RTP per RFC 2833
MFC-R2, MF-R1, MF-R1 (US) including FG-A/B/D
In-band/Out-of-
band Signaling
(DTMF & Tone
Detection/Generati
on)
Packet side or PSTN side generation/detection of DTMF and User
Defined Call Progress Tones (PSTN, IP) & Continuity Test Tones (per
ITU-T Q.724)
PSTN Protocols CCS - ISDN PRI: ETSI EURO ISDN, ANSI NI2, DMS, 5ESS, Japan
INS1500, QSIG Basic Call, Australian Telecom, New Zealand Telecom,
Hong Kong Variant, Korean MIC
Maintenance
Management Element Management System, SNMP v2
OAM Single point of access via the System Controller; easy management
and provisioning with standard SNMP v2 interface
Maintainability All shelf modules are hot swappable, including boards, Power Supply
modules, fans and Alarm modules
Redundancy
Scheme CPUs, Ethernet switches: Active/Standby
Power supplies, fans: Load Shared
Media Gateway boards: N+1
Diagnostic Automatic and Manual HW and SW Diagnostic, BIT (Built in Test) fault
detection, heart beat, chassis sub-systems monitoring
Physical Interfaces
STM-1/OC3
Interfaces (future) Per TPM Board:
Replaceable LC connectors; 155 Mbps optical SFP modules; Hot
Swappable
T3 Interfaces Per TPM Board:
Single T3 (DS-3) ports using unshielded SMB connectors
IP Interfaces Per ES Board:
Up to 3 different IP Uplinks, depending on Ethernet Switch type:
ES/6600
OAM 100 Base-TX
Control 100 Base-TX
Media 3 aggregated 1000 Base-TX
100/1000 Base-TX: RJ-45 Connector Interface (CAT5 Twisted pair)
1 Gigabit optical: Multimode, SC-duplex 1000 Base-SX for the Gigabit