Avaya G860, Установка и эксплуатация

Страница: 79 / 214

Issue 1 October 2007 79
9. Configuring System Controller Software for the First Time
3. At the Master SC IP address prompt, enter the internal IP address of the main or
initially active SC board.
Master SC IP address [0.0.0.0]:
10.1.1.1
4. At the Redundant SC IP address prompt, enter the internal IP address of the
standby SC board.
Redundant SC IP address (or 1.1.1.1 if none) [0.0.0.0]:
10.6.8.29
5. At the EMS server prompt, enter the IP address of the EMS server or MIB
Browser server. For the Second EMS server (which is not applicable), accept the
default of no IP address
EMS server [0.0.0.0]:
10.6.1.8
6. At the NTP server IP prompt, enter the IP address of the NTP server.
NTP server IP [10.2.229.57]:
7. At the Enable Security prompt, to enable Security, type 1 . To disable Security,
type 0 . For more information refer to 'About Security in the Avaya G860 Media
Gateway' on page 110 .
Enable Security (0-no, 1-yes) [0]:
8. If you have enabled Security, you are prompted to enter the EMS IKE Pre-Shared
Key. We recommend you type in an IKE Pre-Shared Key consisting of at least 10
characters (no spaces among them).
EMS IKE Pre-Shared Key [leave unchanged]:
**********