Avaya G430, Руководство пользователя

Страница: 596 / 696

2. Use the
next-hop-ip
or
next-hop-interface
command again, without the
track
keyword.
Changing the object tracker and keeping the next hop
Procedure
1. Enter the context of the next hop list.
2. Use the
next-hop-ip
or
next-hop-interface
command again, with the
track
keyword followed by the new track index.
Editing and deleting PBR lists
About this task
You cannot delete or modify a PBR list when it is attached to an interface. In order to delete
or modify a PBR list, you must first remove the list from the interface. You can then delete or
modify the list. After modifying the list, you can reattach the list to the interface.
Procedure
1. To remove a list from an interface, use the
no
form of the
ip pbr-group
command
in the interface context.
The following example removes the PBR list from the VLAN 2 interface.
Gxxx-001(super)# interface vlan 1
Gxxx-001(super-if:VLAN 1)# no ip pbr-group
Done!
Gxxx-001(super-if:VLAN 1)#
2. To modify a PBR list, enter
ip pbr-list
, followed by the number of the list you
want to modify, to enter the list context.
Redefine the parameters of the list.
3. To delete a PBR list, enter
exit
to return to general context and enter
no ip pbr-
list
followed by the number of the list you want to delete.
Policy-based routing
596 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com