Avaya G430, Руководство пользователя

Страница: 175 / 696

5. If the BRI link is employed with ISDN, enter
set country-protocol country-
code
to specify the ISDN Layer 3 country protocol type, where
country-code
is
any the values listed in ISDN Layer 3 country codes on page 172.
6. If the BRI link is employed with ISDN, enter
set bearer-capability bearer
to set the Information Transfer Rate field of the Bearer Capability IE, where
bearer
is one of the following values:
• 3khz. 3.1 kHz audio encoding
• speech. Speech encoding
7. Enter
set interface-companding type
to set the far-end companding
method, where
type
is one of the following values:
• alaw. A-law companding
• ulaw. U-law companding
8. If the BRI link is employed with ISDN, enter
set tei-assignment tei
to select
the method by which the Layer 2 (LAPD) protocol obtains its Terminal Endpoint
Identification (TEI) address.
tei
is one of the following values:
• auto. TEI is assigned by the network provider
• zero. TEI is fixed administratively
9. Enter
set directory-number-a number
to assign a directory number to the
B1 channel of the BRI link.
number
is the provisioned number received from the network provider. The
number
value must be identical to the number the network provider has assigned to the
circuit.
10. Enter
set directory-number-b number
to assign a directory number to the
B2 channel of the BRI link.
number
is the provisioned number received from the network provider. The
number
value must be identical to the number the network provider has assigned to the
circuit.
11. Enter
set spid-a number
to assign an SPID to the B1 channel of the BRI link.
12. Enter
set spid-b number
to assign an SPID to the B2 channel of the BRI link.
Note:
All BRI links must have SPIDs properly configured for the link to function. SPIDs
are received from the network service provider.
13. If the BRI link is employed with ISDN, enter
set-endpoint-init
{yes | no} to
determine whether or not the far-end supports endpoint initialization.
14. If the BRI link is employed with ISDN, enter
set layer1-stable
{yes | no} to
determine whether or not to keep the physical layer active (stable) between calls.
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 175