manualshive.com logo in svg

Avaya D260, Инструкция по использованию, Страница: 64 / 99

Поделиться
Скачать
Avaya D260 Скачать руководство пользователя страница 64

In the status bar, the bluetooth icon 

 is shown if bluetooth is enabled, but the handset is not

paired with any bluetooth devices. This bluetooth icon   is displayed if the handset is paired with

a bluetooth device.

Search for devices

To search for bluetooth devices the bluetooth function needs to be enabled before the handset can

find any devices. For the bluetooth device to be found by the handset search it needs to be in

pairing mode. Until the handset has found any bluetooth devices in pairing mode a searching

screen as displayed below is seen.

As seen above, the bluetooth devices in pairing mode will be listed as they are detected by the

handset. At first the ID of the bluetooth device will only be shown, but waiting a little while the

name of the device will appear on the handset screen. In this way it is easy to locate if it is the

wanted device that the handset is about to connect to.

Often, a PIN code is requested when a device is selected. By entering the requested PIN code of

the bluetooth device a connection should be successfully established as shown in the following

window.

Menu operation

August 2020

Using Avaya Wireless Handset D260

64

Comments on this document? [email protected]

Содержание D260




































































































Отзывы:

Нет отзывов