manualshive.com logo in svg

Avaya D260, Инструкция по использованию, Страница: 57 / 99

Поделиться
Скачать
Avaya D260 Скачать руководство пользователя страница 57

As seen above, an editor is displayed when entering the menu. The handset name is typed in by

using the numeric keys and afterward pressing the left softkey 

Save

. The handset name is

displayed in the third line of the idle display.

Line

If the handset is used in a multiline environment, it is possible to select preferred lines for the

handset to make outgoing calls from in this Line menu as shown in the following window.

Note:

To see additional information on this “Line” feature, please check the base system document.

Reset settings

The handset settings can be reset to default settings by selecting menu 

Reset settings

.

As it can be seen above, the handset PIN code is required to reset the handset to its default

settings. After such a reset the handset is still registered. The base is not reset to default when

selecting this feature.

Status

The menu Status delivers some useful information to the end user about both base station that the

handset is currently using and handset status.

Settings

August 2020

Using Avaya Wireless Handset D260

57

Comments on this document? [email protected]

Содержание D260




































































































Отзывы:

Нет отзывов