manualshive.com logo in svg

Avaya D260, Инструкция по использованию, Страница: 25 / 99

Поделиться
Скачать
Avaya D260 Скачать руководство пользователя страница 25

2.

To unlock the keypad, press the 

 key until the “Press and hold” message

disappears.

Note:

You can answer/reject an incoming call while the keypad is locked.

Entering a number in idle

About this task

When entering a number in idle It is also possible to make call by pressing speaker key or 

off-

hook

 key 

.

Procedure

1.

Save

: With this option the number can be added as a local contact by pressing the left

softkey “Save”.

2.

Line

: Using this option, by pressing the middle softkey “Line”, you can choose which line

the call should be initiated from if the handset is set up to using different lines (see the
base station manual for additional information on this).

3.

Clear

: Using the right softkey “Clear” deletes one character at a time to the left of the

cursor.

Entering a number in idle

August 2020

Using Avaya Wireless Handset D260

25

Comments on this document? [email protected]

Содержание D260




































































































Отзывы:

Нет отзывов