Avaya D260 Скачать руководство пользователя страница 19

Страница: 19 / 99

Icons details

Display icons

Icons

Description

Signal strength

icon is always visible in the upper left corner. The number of

green staples is displayed according to the strength of the signal.

Battery

icon is always visible in the upper right corner, and shows how much

battery that is left on the handset.

Missed call

icon is displayed in the status bar, and indicates that there has been

a missed call which can be seen in the call list.

Voice mail message

icon is displayed in the status bar when there are voice

mails that have not been listened to. This icon remains until you listen the voice
mail.

Message

icon is displayed in the status bar when there are messages on the

handset that have not been read.

Alarm

icon is displayed in the status bar and indicates that an alarm has been

set on the handset.

Silent Alarm

icon is displayed in the status bar when the handset is in silent

mode, or if the volume is set to the mute and an alarm is enabled.

Sound off/Silent

icon is displayed in the status bar when silent mode is enabled

on the handset.

Keylock

icon indicates when the keypad is locked, and the user needs to long

press the *-key to be able to use the handset again.

Do not disturb

icon is displayed in the status bar when this feature is enabled; in

this case the handset does not react on any incoming calls.

Headset

icon indicates that wired headset has been inserted and detected

icon is displayed during a call if the quality of the call is “High Definition” and

hereby using the G.722 codec (also called a wideband call).

Menu icons

All the menus available on the handset are displayed when the menu key is pressed from idle.

The available menus are shown in the following window.

Icons and text in the display

August 2020

Using Avaya Wireless Handset D260

Comments on this document? [email protected]

Содержание D260




































































































Результаты поиска

Содержание D260

Отзывы:

Avaya D260, Инструкция по использованию, Страница: 19 / 99

Результаты поиска

Содержание D260

Отзывы: