3. Under Controller Properties, set
Auto Import Foreign Configuration
to
Enabled
.
4. Click
Apply Changes
.
5. Scroll down and click
OK
.
6. Click
Back
.
Next steps
Proceed to
on page 71 for the steps to create a virtual disk by selecting
the RAID level, physical disks, and virtual disk parameters.
Creating a virtual disk
About this task
Use this procedure to create a virtual disk by selecting the RAID level, physical disks, and virtual
disk parameters.
Before you begin
• Delete all existing configurations on the RAID controller.
• Configure the controller properties.
• Ensure that
Auto Import Foreign Configuration
is set to
Enabled
.
Dell USB R640 RAID Configuration
October 2019
Installing the Avaya Converged Platform 130 Series
71