5. Perform the following actions to install the system in the rack:
Task order
Task
1
Pull the inner slide rails out of the rack until they lock into place.
2
Locate the rear rail standoff on each side of the system and lower them into the
rear J-slots on the slide assemblies.
3
Rotate the system downward until all the rail standoffs are seated in the J-slots.
4
Push the system inward until the lock levers click into place. Press the slide-
release lock buttons on both rails and slide the system into the rack
Attaching cables
About this task
Use this procedure to attach network and I/O cables to the system.
Installation
October 2019
Installing the Avaya Converged Platform 130 Series
26