5. When the TLS change completes it will provide a list like the one below showing the
enabled TLS version for each service.
Related links
Management of the TLS protocol configuration for vSphere 6.5 U2 Environment
on page 52
Configuring TLS v1.2 only for an individual ESXi host
About this task
Use the following procedure to disable TLS v1.0 and TLS v1.1 and enable TLS v1.2 only for an
individual ESXi host
Before you begin
• The ESXi host must be rebooted for the change to take effect. Ensure this procedure is
performed in a maintenance window where the temporary unavailability of the host will not
impact service.
• When running the script on an individual ESXi host it will prompt for a password. This is the
vCenter Server Appliance
root
or
password.
Dell R640 XL ESXi Configuration
October 2019
Installing the Avaya Converged Platform 130 Series
55