Adding or Removing Hardware
Install terminal server
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
287
June 2004
•
Host
: leave blank or enter
IP Address
•
R
emote Port
: 0
•
Local Port
: must match the value of Remote Port on the IP Services screen of the
Communication Manager software
6
Press ENTER and select Save & Exit to effect the changes.
7
Press ENTER again to view the Administration Menu.
8
Select kill to disable the port connection.
9
Repeat the steps for each additional port you want to administer.
10
When administration is complete, from the Connections Menu, select logout (or press Ctrl D).
11
Close HyperTerminal.
At this point, you have established a connection path from the adjunct through the IOLAN+ to the
.
Testing
1
On the system management terminal, press ENTER to get the login prompt to the
Communication Manager switch.
NOTE:
If you get garbled text, check the baud rate setting on the Port Setup Menu. You can adjust
it up or down.
2
If no login prompt appears, log back into the IOLAN+ through HyperTerminal.
3
Select Admin mode > stats and press ENTER twice.
4
Select users and press ENTER.
5
Look at the port that the adjunct is connected to and see if there is any traffic. If not, check all
your connections and administration fields.
** Administrator ** SERVER STATISTICS Terminal: 2
1. port1 Talking to host 172.22.22.67.5111<DSR+CTS+DCD >DTR+RTS
2. port 2 SERVER STATISTICS <DSR+DCD >DTR+RTS
3. port 3 waiting for DSR or DCD >DTR+RTS
4. port 4 modem waiting for DSR or DCD >DTR+RTS
REM <unknown> logged out
LOG logger not enabled
________________________________________________________________________________
Press <RETURN> to see list of options.
IOLAN PLUS v4.02.00 a CDi iolan-st
