6. To review the settings, select
Continue
and then select
Accept and continue
.
The system runs pre-install configuration checks.
7. To install the software, select
Continue
and then accept the license agreement.
Wait for several minutes while the installation proceeds.
8. Select
Continue
to start the configuration utility.
Important:
Do not change the settings in
Front-end host, System Manager and Certificate
Configuration
without reentering the System Manager enrollment and keystore
passwords before applying the changes.
9. Select
LDAP Configuration
, and then configure each of the LDAP settings using the
LDAP configuration information for your network.
For more information on LDAP configuration, see
on page 77.
10.
(Optional)
If this is an initial node for a cluster, and you want to use internal load
balancing, do the following:
Important:
• The virtual IP address is used for redundancy management of the internal load
balancer in a cluster.
• To avoid performance degradation of the cluster, an external load balancer is
recommended for clusters with four or more nodes.
• For a cluster deployment that uses an external load balancer, you must configure
Front-end IP or FQDN
as the FQDN corresponding to the external load balancer.
• If you use an external load balancer, do not configure the virtual IP settings that
enable the internal load balancer.
a. Select
Clustering Configuration
>
Virtual IP Configuration
.
b. Select
Enable virtual IP
and set the value to
y
(yes).
The system displays additional Virtual IP configuration.
c. Configure all of the Virtual IP settings as described in
on page 91.
You must configure the initial node as the Virtual IP master node. In a cluster, you
must configure one additional node as the Virtual IP backup node.
Important:
You must save the Virtual IP authentication password. You need this password
when configuring the second node in the cluster as the virtual IP backup node.
d. To save the changes on the system, select
Apply
and then select
Continue
.
e. Select
Return to Main Menu
and press
Enter
.
Avaya Aura
®
Web Gateway setup
October 2018
Deploying the Avaya Aura
®
Web Gateway
66
