30
Chapter 2 Provisioning the Avaya 7406 Digital Mobile Handset
NN40110-300
NN40110-300
Battery Charge Controller
The Avaya 7406 Digital Mobile Handset incorporates a special handset battery charge controller
that employs a four-stage charging program that sequences charging from a soft start to a fast
charge, and then to a topping charge, followed by a maintenance charge.
This four-stage charge sequence presents an optimum-charging plan that helps maximize the
overall life of the battery by managing two critical elements in the battery charging process, the
charge rate and overcharging protection. Note that NiMh batteries do not exhibit memory
problems and it is not necessary to drain the batteries prior to recharging.
Low battery status is indicated on the handset by the visual charge status on the display and/or the
audible warning tone.
The Avaya 7406 Digital Mobile Handset can be placed back into the charge cradle for charging
when it is not in use.
•
A fully depleted 1400 mAh battery will be restored to full charge in three hours.
•
The handset charge light will turn from red to green to indicate that the handset battery is fully
charged and ready for use.
•
The Avaya 7406 Digital Mobile Handset charge stand provides a rear port as a trickle charger
that charges a fully depleted 1400 mAh battery in 12 to 14 hours.
Specifications
Frequency band
Half of the 900 MHz ISM band:
either 902 to 915 MHz or 915.1 to 928 MHz
Total channel
capability
Spread spectrum frequency hopping is available on
27 channels per base
Handset dimensions
Length: 170 mm/6.8 inches (without antenna)
Width: 58 mm/2.32 inches
Overall Thickness: 40 mm/1.60 inches
Handset range
Typical range of 95 m/300 feet, depending on the
physical environment
Handset weight
280 g/9.38 oz. (with battery pack)
Battery Pack
Capacity: 1400 mAh, 3.6 V
Talk Mode: up to five hours (with backlight OFF)
Standby Mode: up to 72 hours
Base dimensions
Length: 150 mm/6 inches
Width: 160 mm/6.4 inches
Height (front): 28 mm/1.12 inches
Height (rear): 34 mm/1.36 inches
Base power
Input: 110 VAC, 60 Hz
Output: 9 VDC, 600 mA
Содержание 7406
Страница 24: ...24 Chapter 1 About Avaya 7406 Digital Mobile Handset NN40110 300 NN40110 300 ...
Страница 42: ...42 Chapter 3 Using the Avaya 7406 Digital Mobile Handset Display Buttons NN40110 300 NN40110 300 ...
Страница 47: ...Chapter 4 Regulatory information 47 Avaya 7406 Digital Mobile Handset Installation Guide ...