Avaya 7406 Скачать руководство пользователя

Страница: 7 / 47

Chapter 1 About Avaya 7406 Digital Mobile Handset

Avaya 7406 Digital Mobile Handset — Installation Guide

Handset Overview

The handset automatically links with the base station by searching for the base station signal when
the following are completed:

•

battery is charged

•

base station and handset are powered

•

handset identification is configured

•

base station Security Code is assigned

Handset Signal Detection

You can monitor the handset signal strength while moving to different locations. The antenna/
signal strength and battery icons appear on the handset display.

When you move too far from the base station, the following occurs on the handset:

•

the antenna/signal strength icon disappears

•

ï ï ïïïïïïï ï ï ïïïï

message appears

•

handset produces an intermittent beep

•

handset may go into scanning mode

If the signal strength is weak, move back into range to stop the handset display messages and
warning tones.

If you go completely out of range during an active call, the call is automatically placed on hold.
For more information, refer to

“Hold calls” on page 36

. Retrieve a held call by selecting the

flashing red line button when you are back in range.

Note:

In cases where the line button does not light when you move back into

range of the base station, press the intercom/line button that the call came in on, to
take the call off hold

Содержание 7406
















































Результаты поиска

Содержание 7406

Отзывы:

Похожие инструкции для 7406

Бренды по названию

Популярные бренды

Avaya 7406, Руководство по установке

Результаты поиска

Содержание 7406

Отзывы:

Похожие инструкции для 7406

Бренды по названию

Популярные бренды