Avaya 7406 Скачать руководство пользователя

Страница: 43 / 47

Avaya 7406 Digital Mobile Handset — Installation Guide

Chapter 4

Regulatory information

Canadian Regulations

This device complies with Industry Canada CS03 Issue 8 specifications, and ICES-003 and
RSS-210 Canadian EMI requirements.

Operation is subjected to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.

Privacy of communications may not be assured when using this phone.

Do not attempt to repair this equipment. If you experience trouble, call or write for warranty and
repair information.

Avaya
30 Norelco Drive,
Weston, Ontario, M9L 2X6
Canada

US Regulations

Federal Communications Commission (FCC) Notice

FCC registration number:

This telephone equipment complies with Part 68, Rules and

Regulations, of the FCC for connection to Host equipment and may not be connected directly to
the Public Switched Telephone Network (PSTN).

(The FCC registration number appears on a sticker affixed to the bottom of the base.)

Do not attempt to repair this equipment. If you experience trouble, call or write for warranty and
repair information.

Note:

This equipment may only be connected to the Host equipment and may not

be connected directly to the Public Switched Telephone Network (PSTN).

Note:

This device complies with Class A EMI requirements when connected to

host equipment that meets Class A and Class B when connected to host equipment
that meets Class B.

Содержание 7406
















































Результаты поиска

Содержание 7406

Отзывы:

Похожие инструкции для 7406

Бренды по названию

Популярные бренды

Avaya 7406, Руководство по установке

Результаты поиска

Содержание 7406

Отзывы:

Похожие инструкции для 7406

Бренды по названию

Популярные бренды