Avaya 3641, Установка, настройка и администрирование

Страница: 134 / 150

Part D: Appendices
134 Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool
2. Appendix B: Troubleshooting
Most, but not all, Wireless IP Telephone audio problems have to do with access point
range, positioning and capacity. Performing a Site Survey as described in the
Diagnostics
section can isolate the AP causing these types of problems. If the Wireless IP Telephone
itself is suspected, conduct a parallel Site Survey with a Wireless IP Telephone that is
known to be properly functioning.
• In-range/Out-of-range – service will be disrupted if a user moves outside the area
covered by the wireless LAN access points. Service is restored if the user moves
back within range. If a call drops because a user moves out of range, the Wireless
IP Telephone will recover the call if the user moves back into range within a few
seconds.
•
Capacity – in areas of heavy use, the call capacity of a particular AP may be filled.
If this happens, the user will hear three chirps from the Wireless IP Telephone.
The user can wait until another user terminates a call, or move within range of
another AP and try the call again. If a user is on a call and moves into an area
where capacity is full, the system attempts to find another AP. Due to range
limitations, this may be the same as moving out of range.
•
Transmission Obstructions –prior to system installation, the best location for APs
for optimum transmission coverage was determined. However, small pockets of
obstruction may still be present, or obstructions may be introduced into the
facility after system installation. This loss of service can be restored by moving
out of the obstructed area, or by adding APs.
If the Avaya Aura™ Communication Manager registration fails, note any error messages on
the display including which line icons are active. This information will help with problem
resolution.