Avaya 3641 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 150

background image

The Avaya 3641/3645 Wireless IP Telephone Specifications

Issue 6, January 2011

45

Indicator Function

The signal-strength icon indicates the strength of the signal and can assist the user in

determining if the handset is moving out of range.

The letter “A” or “B” replaces the radio wave graphic in the signal strength icon when band

roaming is active to indicate which 802.11 band is currently being used by the handset.

The voicemail icon is activated when a new voicemail message is received if the feature is

supported by the phone emulation.

The battery icon indicates the amount of charge remaining in the Battery Pack. When only one

level remains, the Battery Pack needs to be charged.

The speakerphone icon displays when the speakerphone is active.

1

▪ ▪ ▪ ▪ ▪ ▪ ▪

The line indicators are associated with telephone line status and access.

Up and down arrows are displayed when the menu has additional options above or below.

Left or right arrows are displayed during editing when the cursor may be moved left or right.

PBX ring icon. A regular telephone call is coming in.
OAI ring icon. A call is coming in from the OAI application.

The push-to-talk (PTT) ring icon. A PTT call is coming in.

The priority PTT ring icon. A call is coming in on the priority PTT channel. This call will override

any other.

Location Service (RTLS) is enabled.

Muted

The muted indicator displays after the Mute softkey has been pressed. It indicates that the
microphone is not transmitting sound. Press the Mute softkey again to unmute the microphone.

Locked

Locked indicates that the keypad is locked to prevent accidental activation. Use the Unlk softkey
plus the # key to unlock it.
Avaya 3645 only: If Emergency Dial is enabled by the system administrator an emergency call
can be made while the keypad is locked.

[No Service message] If warning tones are not disabled, an alarm will sound and a descriptive message displays when

the handset cannot receive or place calls. You may be outside of the covered area. Walk back

into the covered area. The in-service tone indicates that service is reestablished.

The download icon indicates that the handset is downloading code. This icon only appears while

the handset is running the over-the-air downloader. It appears to the right of the signal

strength icon in the same location as the voicemail icon.

The download failure icon indicates that the handset has failed to download code because the

code is incompatible with the handset hardware. The system will also create a system log with
the message: “Download aborted, code incompatible”. When this icon appears, the handset

code in the TFTP server should be updated.

«
...
43
44
45
46
47
...
»

Содержание 3641























































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3641

PELTOR ComTac VI

Бренд: 3M Страницы: 5

Бренд: G-Star Страницы: 4

Бренд: Acer Страницы: 5

Бренд: Iluv Страницы: 20

Бренд: Huawei Страницы: 13

Бренд: Motorola Страницы: 82

Бренд: Motorola Страницы: 55

Бренд: Motorola Страницы: 78

Бренд: Sony Страницы: 14

Бренд: Sigtronics Страницы: 2

Бренд: Gigaset Страницы: 24

Бренд: Gigaset Страницы: 126

Бренд: RCA Страницы: 6

Бренд: Jabra Страницы: 12

Бренд: Jabra Страницы: 29

Бренд: Jabra Страницы: 33

PELTOR PIC-100 NA

Бренд: 3M Страницы: 64

Бренд: iblast audio Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды