AVANT STAGEV 860i, Руководство оператора

Страница: 99 / 148

Avant 860i Storage, Transport, Tie down points and Lifting
99
Storage
If outdoors storage is necessary, protect the machine
with the designated weather cover (part no. 65436).
Do not use the full, closed
transport and weather cover over
long periods of time as it promotes
corrosion due to moisture that will
condense inside it. The light
weather cover can be used.
. ..
Before long term storage (more than 2 months),
prepare the loader to ensure long service life and
trouble-free use of the loader.

It is recommended to have the periodic service
made before storage. Contact Avant service.

Clean the loader carefully.

Check and touch-up painted surfaces, if
necessary, in order to avoid rust damages.

Grease the greasing points and lubricate the
piston rods of the cylinders with oil.

Remove the battery from the loader and store it
in a cool, well-ventilated place. Charge the
battery monthly.

Store the loader indoors if possible. Do not store
the loader in direct sunlight.

See the engine owner’s manual to prepare the
engine for long term storage.

Inflate the tyres to the recommended tyre
pressure.

Fill the fuel tank and the hydraulic oil tank to the
maximum marks.

Cover the engine exhaust pipe outlet.
.
Lifting of the loader
Lifting a loader with ROPS: When lifting a loader
equipped with the ROPS frame, use four lifting slings
that are approved for lifting purpose, and which are
minimum 2000 mm (79 inches) long. Loop the slings
around the four ROPS posts. Lifting kit A418706
includes all necessary parts and detailed instructions
to lift a loader with ROPS frame.
Make sure that the lifting slings cannot move and
that the loader doesn’t swing during lifting. Loop the
lifting straps around all four ROPS posts and make
sure they are not tied or get damaged by e.g. sharp
corners.
WARNING
Risk of dropping of the loader -
Use appropriate equipment and
follow safety instructions and
safe practices when lifting the
loader.

Remove heavy attachment and
possible extra weights from the
loader.

Lower the boom down.

Mount the frame articulation
lock to the frame of the loader.

Follow the instructions given in
the operator’s manual of the
lifting kits for each cab type.

Never lift a loader with persons
riding the machine.
Lift the loader as smoothly as
possible, and do not allow it to
drop or wobble.