AVANT STAGEV 860i, Руководство оператора

Страница: 50 / 148

Controls and options of the Loader Avant 860i
50
.
Indicator lights
Symbol Colour Remarks
A
Green
Turn signal indicator
Road traffic light kit only
B
Red
Electric malfunction
The vehicle ECU has
detected an electric error
with potential safety or fire
hazards requiring service.
If this light remains lit, turn
battery disconnect switch to
OFF and contact Avant
service.
C
Red
Load sensor indicator
Warning: Too heavy load is
being lifted. See page 39.
D
Red
Stop signal
The engine or vehicle ECU
has detected an error that
makes it necessary to stop
the loader as soon as
possible. Turn the battery
disconnect switch to
position OFF.
E
Blue
High beam headlights on
Road traffic light kit only
F
Amber
Not in use in this loader
model
G
Amber
PTO engaged
PTO switch is activated:
Drive pedals are disabled
for using a stationary
attachment.
H
Green
Seat heater on
See page 67
.
Multi-function display
The multi-function display shows basic information
whenever the loader is running. The display also has
other information available, which can be selected
with the buttons of the display.
Shown in the basic display view
This view is automatically shown when the loader is
started.
1.
Ambient temperature can be displayed in
Celsius of Fahrenheit.
2.
Current fuel consumption in litres per hour
3.
Total operating hours
4.
Current time
5.
Message area: Instead of information listed
above, this area can display a message
needing user action. For information about
different messages see page 53
6.
Selected speed range
7.
Load sensor information
8.
Engine RPM
9.
Fuel tank level
10.
Information about selected display page and
DPF controls
11.
Auxiliary hydraulics pump switch position
12.
Current output of auxiliary hydraulics in litres or
gallons per minute. In some cases also a
warning triangle can be shown here.
Hydraulic oil temperature: The background
color of the center of display represents the
temperature of the hydraulic oil. Red
background signals that the hydraulic oil is hot.
If possible, reduce load on the hydraulic oil, or
stop to allow the hydraulic oil to cool.