AVANT STAGEV 860i Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 148

background image

Avant 860i

Service and maintenance

135

.

Jump start and auxiliary power

The engine can be started with auxiliary power if

necessary, by using appropriate jump start cables

that have large conductor cross section.

Alternatively, a separate start booster with its internal

battery can be used, refer to its instructions about

correct use.

Jump start and auxiliary power

The engine can be started with auxiliary power if

necessary, by using appropriate (strong enough)

jump start cables.

1.

Connect first one end of the positive cable to

the positive (+) post of the dead battery.

2.

Connect the other end of the positive jumper

cable to the positive (+) post of the charged

battery.

3.

Connect one end of the negative jumper cable

to the negative (-) post of the charged battery.

4.

Connect the other end of the negative jumper

cable to a solid, non-paint coated metal part of

the engine of the dead loader, as far from the

dead battery as possible.

WARNING

Risk of battery acid spill and
other injuries - Use jump start
procedure only when other
means for start are not available.

A battery can explode and spill
battery acid during jump start
procedure, especially if it is
damaged, worn out, or frozen.
Jump start must be used only
when other means are not
available. Replace a worn battery,
do not jump start repeatedly.
Charge the battery with an external
charger whenever it is possible.

WARNING

Risk of uncontrolled movement
and contact with moving or hot
parts, sparks and fire, and
engine damage - Never bypass
battery or connect cables
directly to starter motor.

There is

a risk of serious injuries caused by
moving parts of the engine, and
moving of the loader. Also, the
engine or its electric components
or control unit may get damaged.
Always follow the recommended
jump start procedure, or use a
separate auxiliary starter battery, if
the loader can't be started with its
own battery.

CAUTION

Read Operator's Manual of the
vehicle that is giving auxiliary
power, in order to make sure that
the vehicle suited for the purpose.
The vehicle can get damaged
when giving auxiliary starting
power.

Always read the Operator’s manual
of the vehicle that is giving or
receiving auxiliary power. The
manufacturer of the other vehicle
may have prohibited giving or
receiving auxiliary power by jump
cables, and there may be special
provisions related to the
connection of jump start cables.
Not all vehicles are designed to
give or receive power for jump
start. The vehicle can get severely
damaged when giving or receiving
auxiliary starting power. Avant
takes no responsibility of damages
caused by giving or receiving
auxiliary power.

«
...
133
134
135
136
137
...
»

Содержание STAGEV 860i





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для STAGEV 860i

Бренд: Baoli Страницы: 112

Бренд: Toro Страницы: 12

Wacker Neuson SM325-27T

Бренд: DINGO Страницы: 20

Бренд: OM Страницы: 108

Бренд: Worldwide Construction And Forestry Division Страницы: 23

Бренд: Worldwide Construction And Forestry Division Страницы: 20

Бренд: ahlmann Страницы: 138

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды