33 (36)
7.5
Adjusting conveyor
In case of increased slack of the conveyor, or
increased noise and rattling, check the tensioning of
the conveyor.
Tighten the conveyor as follows:
First, loosen the four retaining bolts (1) of the
bearing.
Then, adjust the distance with adjustment screw
(2). Do not tighten the conveyor by force, some
play must be allowed for its smooth operation.
Excessive tightening will cause quick wearing of
the conveyor and its pulleys.
Finally, make sure that both sides are adjusted
to the same setting. Incorrect alignment of the
conveyor may cause damage or the belt to wear
quickly.
Tighten the bearings before operating the
dispenser. Check the tensioning after tightening to
ensure the correct alignment and operation.
Содержание A424013
Страница 2: ...Silage dispenser 2020 1 ...
Страница 36: ......