7 (36)
3.
Safety instructions for using the attachment
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
DANGER
Misuse, careless use, or using an attachment that is in poor condition may
cause risk of serious injuries.
Familiarise yourself with the controls of the loader,
correct coupling procedure, and the correct way to operate the attachment at a safe
area. Study especially how to stop the equipment in a safe manner. Read all safety
precautions carefully.
Read all safety instructions carefully before handling the attachment
WARNING
When attaching an attachment to the loader,
ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader.
Never lift or move an unlocked attachment.
This attachment is designed to be used by one operator at a time. Do not let others
near the danger area of the equipment when it is in use.
Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
Risk of tipping over - Lower attachment on the ground before filling from a silo.
Added material can tip the loader over.
Sudden movements can cause the loader to tip over - Operate the controls of
the loader in a slow and calm manner.
Be careful when lifting load to high level or
lifting load from high. Avoid sudden changes in speed or direction to maintain
balance of the loader especially when handling heavy loads. Drive slowly and
carefully especially on inclined terrain or slippery surfaces.
Risk of crushing - Never go or allow anyone else to go under the loader boom
or attachment.
The stability of the loader may change when leaving the driver’s seat,
leading to tipping over of the machine. Always remember that the boom may lower
unexpectedly due to loss of stability, mechanical fault, or if another person operates
the controls of the loader, leading to crushing hazard. The loader is not intended to
be left to keep a load elevated for longer periods. Lower the attachment firmly on the
ground before leaving the driver's seat and never allow anyone to be under the boom
or attachment.
When unlocking and removing the bucket off from the loader, ensure that it is
secured against accidental movement. To prevent the attachment from tipping over,
empty it first and lower it on even surface. Ensure the bucket is supported properly
during storage.
Before starting the dispenser bucket, make sure that there are no foreign objects in
the bucket that could be ejected from the attachment or that could damage the
equipment.
Be sure not to tilt the bucket too far up to prevent material from spilling from the
bucket.
Check the conveyor regularly. Read the instructions on maintenance and servicing
and only use original spare parts.
Содержание A424013
Страница 2: ...Silage dispenser 2020 1 ...
Страница 36: ......