Avalue Technology ECM-CX700 Скачать руководство пользователя страница 76

Страница: 76 / 104

ECM-CX700

76 ECM-CX700 Series User’s Manual

3.5.6.4

IRQ Resource

When resources are controlled manually, assign each system interrupt a type, depending

on the type of device using the interrupt.

This item allows you to determine the IRQ assigned to the ISA bus and is not available to

any PCI slot. Legacy ISA for devices compliant with the original PC AT bus specification,

PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed for

PCI or ISA bus architecture.

The Choices: Legacy ISA, PCI/ISA PnP.

3.5.6.5

PCI / VGA Palette Snoop

Leave this field at Disabled.

The choices: Enabled, Disabled.

3.5.6.6

Assign IRQ For VGA

While the system has one VGA controller and more than one VGA devices are connected,

then “Enabled” is set. If the system VGA controller is not used, then “Disabled” is set.

The choices: Enabled, Disabled.

3.5.6.7

Assign IRQ For USB

While the system has one USB controller and more than one USB devices are connected,

then “Enabled” is set. If the system USB controller is not used, then “Disabled” is set.

The choices: Enabled, Disabled.

3.5.6.8

Maximum ASPM Supported

This field is used to control the maximum level of supported ASPM on the given PCI

Express link on the system

The choices: L0, Los, L1, L0s&L1.

Содержание ECM-CX700









































































































Результаты поиска

Содержание ECM-CX700

Отзывы:

Avalue Technology ECM-CX700, Руководство пользователя, Страница: 76 / 104

Результаты поиска

Содержание ECM-CX700

Отзывы: