Avalue Technology ECM-CX700 Скачать руководство пользователя страница 61

Страница: 61 / 104

User’s Manual

ECM-CX700 Series User’s Manual

3.5.2.13 MPS Version Control For OS

This feature is only applicable to multiprocessor board as it specifies the version of the

Multi-Processor Specification (MPS) that the board will use.

The choice: 1.4, 1.1.

3.5.2.14 OS Select for DRAM > 64MB

Select the operating system that is running with greater than 64MB of RAM on the system.

Item

Description

Non-OS2

Disable OS for over 64 MB DRAM

OS2

Enable OS for over 64 MB DRAM

3.5.2.15 Video BIOS Shadow

To allow copying Video BIOS into shadow RAM to improve video performance.

Item

Description

Enable

Copy Video BIOS into shadow RAM

Disable

Do not copy Video BIOS into shadow RAM

3.5.2.16 Full Screen LOGO Show

If the BIOS had the full screen logo in it, this item could allow enable/ disable the full screen

logo show on display.

Item

Description

Enable

Enable full screen logo show

Disable

Disable full screen logo show

3.5.2.17 Small Logo (EPA) Show

This item allows you enabled/disabled the small EPA logo show on screen at the POST

step.

Item

Description

Enabled

EPA Logo show is enabled

Disabled

EPA Logo show is disabled

Содержание ECM-CX700









































































































Результаты поиска

Содержание ECM-CX700

Отзывы:

Avalue Technology ECM-CX700, Руководство пользователя, Страница: 61 / 104

Результаты поиска

Содержание ECM-CX700

Отзывы: