Avalue Technology ECM-CX700 Скачать руководство пользователя страница 4

Страница: 4 / 104

ECM-CX700

4 ECM-CX700 Series User’s Manual

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.avalue.com.tw/

If you still cannot find the answer, gather all the information or questions that apply to your

problem, and with the product close at hand, call your dealer. Our dealers are well trained

and ready to give you the support you need to get the most from your Avalue’s products. In

fact, most problems reported are minor and are able to be easily solved over the phone.

In addition, free technical support is available from Avalue’s engineers every business day.

We are always ready to give advice on application requirements or specific information on

the installation and operation of any of our products. Please do not hesitate to call or e-mail

us.

Headquarters

Avalue Technology Inc.

7F, 228, Lian-cheng Road,
Chung Ho City, Taipei,
Taiwan
Tel : +886-2-8226-2345
Fax : +886-2-8226-2777

http://www.avalue.com.tw

E-mail:

[email protected]

Europe Branch Office

Avalue Europe A/S

Moelledalen 22C, 3140 Aalsgaarde,,
Denmark
Tel : +45-7025-0310
Fax : +45-4975-5026

http://www.avalue.com.tw

E-mail:

[email protected]

China Branch Office

Avalue Technology Shanghai Inc.

Suite A, South 5F, No. 829,
Yisan Road, Caohejing Hi-tech Park,
Shanghai 200233, China
Tel : +86-21-5426-3399
Fax : +86-21-6495-0370

http://www.avalue.com.tw

E-mail:

[email protected]

US Branch Office

Avalue Technology Inc

200 Tornillo Way, Suite 210,
Tinton Falls, NJ 07712, USA

Tel: +1-732-578-0200
Fax: +1-732-578-0250

http://www.avalue-usa.com

E-mail:

[email protected]

Содержание ECM-CX700









































































































Результаты поиска

Содержание ECM-CX700

Отзывы:

Avalue Technology ECM-CX700, Руководство пользователя, Страница: 4 / 104

Результаты поиска

Содержание ECM-CX700

Отзывы: