Avalue Technology ECM-CX700 Скачать руководство пользователя страница 16

Страница: 16 / 104

ECM-CX700

16 ECM-CX700 Series User’s Manual

The benefit of VIA CX700M can be introduced as below:

•

Advanced HDTV Display Support

Flexibility is extended to display technologies, with the VIA CX700M integrating a built in

HDTV encoder for connection to the latest displays, and multi-configuration LVDS/DVI

transmitter.

•

VIA UniChrome™ Pro Graphics Core

With an internal data flow equivalent to what is available to the latest AGP 8X graphics

cards, VIA UniChrome Pro has a separate 128-bit data path between the North Bridge for

pixel data flow and texture/command access. Separate 128-bit 2D and 3D graphics

engines ensure optimal performance for all multimedia, entertainment, and productivity

applications.

•

Chromotion Video Engine

VIA UniChrome Pro includes native support for the most popular digital video and audio

formats through hardware MPEG-2 playback and acclaimed VIA Vinyl HD Audio suite,

supporting up to eight high definition channels delivering a richer all-around digital media

experience. The image enhancement technology delivering a Hi-Def™ visual experience

including advanced video acceleration for MPEG-2, MPEG-4, and WMV9.

•

Advanced Memory Controller

VIA's renowned memory controller technology has been incorporated into the VIA CX700M,

with support for both DDR400 and the high-bandwidth DDR2 533 memory up to 4GB with

ECC capability, and 32-bit as well as 64-bit system memory to extend performance, design

and cost flexibility to developers.

•

VIA Advanced Connectivity

The VIA CX700M offers broad connectivity with support for SATA, SATA II and PATA

drives, two COM and six USB2.0 ports, and four PCI slots, allowing for considerable

flexibility in board configuration. Additionally, developers can also integrate support for ISA

through an ITE PCI bridge chip, combining legacy ISA connectivity with high bandwidth

DDR2 memory support for more powerful embedded systems.

•

Unified VIA Hyperion Pro Drivers

VIA's unified approach to drivers has been established for eight generations of chipsets,

allowing end users to benefit from seamless hardware and software compatibility.

Here are the brief key features for VIA CX700M:

•

533MB/sec Front Side Bus

•

Supports up to 4GB DDR2 533/400MHz or DDR400/333/266MHz SDRAM

Integrated VIA UniChrome Pro Graphics

•

Integrated VIA UniChrome Pro Graphics

•

Built in HDTV Encoder

•

Chromotion™ video engine

Содержание ECM-CX700









































































































Результаты поиска

Содержание ECM-CX700

Отзывы:

Avalue Technology ECM-CX700, Руководство пользователя, Страница: 16 / 104

Результаты поиска

Содержание ECM-CX700

Отзывы: