Avalue Technology ECM-CX700 Скачать руководство пользователя страница 11

Страница: 11 / 104

User’s Manual

ECM-CX700 Series User’s Manual

1.4 Manual Objectives

This manual describes in detail the Avalue Technology ECM-CX700 Single Board.

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved to

be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to interface

with ECM-CX700 series or change the standard configurations. Whilst all the necessary

information is available in this manual we would recommend that unless you are confident,

you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see the

description of the Jumper Settings for details).

If you have any suggestions or find any errors concerning this manual and want to inform

us of these, please contact our Customer Service department with the relevant details.

Содержание ECM-CX700









































































































Результаты поиска

Содержание ECM-CX700

Отзывы:

Avalue Technology ECM-CX700, Руководство пользователя, Страница: 11 / 104

Результаты поиска

Содержание ECM-CX700

Отзывы: