AV TOOL CSC-1600HD, Руководство по эксплуатации

Страница: 10 / 16

6
INFRARED REMOTE CONTROL OF THE CSC-1600HD VIDEO SCALER
The CR-16 IR Remote Unit duplicates the controls that are available via the Menu and
front panel push buttons.
7 RS-232 CONTROL OF THE CSC-1600HD VIDEO SCALER
The Video Input selection and signal parameter settings for the CSC-1600HD can also be
controlled via an external control system by using the RS-232 port on the unit. If
information for this control method is required, beyond the scope of the instructions
provided in this section, please contact TV One Technical Support. A disk is provided with
the CSC-1600HD containing a sample Windows Control Panel that permits remote control
of the unit from a PC via RS-232.
Note – The connection between the CSC-1600HD unit and the RS-232 remote controller
is made with a modem cable.
Pins definition of modem cable: RS-232 transmission format:
Video Scaler Remote Controller
PIN Definition PIN Definition
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
BaudRate 9600bps
Data Bit
8 bits
Parity None
Stop Bit
1 bit
The IR Control unit
pictured here provides
most of the same controls
available from the front
panel of the unit.
Command/Response codes of RS-232 transmission:
The command/response code is the combination of 3 bytes. The 1st, 2nd byte are text
and the 3rd byte is value.
Remote Controller Command Codes
10