AuviTran AVM500-ES, Руководство пользователя

Страница: 50 / 52

ASIO Configuration
11.2 Disable ASIO mode
Follow the reverse path to disable ASIO streaming and return the port to its original configuration
1. the port’s control tab, disable the ASIO streaming mode.
2. isconnect the port from the control PC. The port disappears from the network displayed in AVS-ESMonitor.
3. Associate the port with the port A. The port is visible again.
o your port is not an EtherSound compatible device, but a computer with an ASIO-
ased application. Let’s see an example.
In
D
1.3 P 1 lay and Record with an ASIO port
To route audio from/to your ASIO port, simply use Netpatch, as you will have done in a regular EtherSound network. The
only difference is that the device plugged t
b
see in this tree
n port E.
you want to play audio from computer to AVP4-ES100, all you have to do is to patch port E down to AVP4-ES100.
In this architecture, we have an AVA4-ES100 that brings its analogue audio inputs on port B, an AVP4-ES100 that can play
up to 4 channels on port D, and a computer with an ASIO based application plugged on port E. This port has been
configured as an ASIO port in its control page. Control PC is plugged on AVM500-ES 3
rd
Port. As you can
view, the computer that plays/record is not visible, because there is no longer EtherSound stream o
If you wan to record audio from AVA4-ES100, all you have to do is to patch its channels to port E.
If
AVM500-ES User’s Manual v2.1 AuviTran 2010 50