AuviTran AVM500-ES, Руководство пользователя

Страница: 25 / 52

Splitting networks for extended capacities
7.2 Generic Multi Networks Mode – Software configuration
We saw in chapter 7.1 an interesting way to expand capacities of AVM500-ES. The limitation of this mode is that AVM500-
ES must be Primary Master. This chapter will explain how to configure your AVM500-ES thanks to ES-Monitor software, to
do almost same things than before, but without the Primary Master limitation.
7.2.1 Definition of the generic Multi Networks Mode
In chapter 6.1, Fig. 1 illustrates a very simplified view of the AVM500-ES behavior. It is in fact a little bit more complicated.
Let’s look at Fig. 19 below.
Fig. 19: Real view of AVM500-ES behavior
Compared to Fig. 1, some switches have appeared. These are controlled via ES-Monitor software, in AVM500-ES Control
Page (Fig. 21). When activating a switch, the related port is dissociated. No more EtherSound stream can reach it, and so
becomes a virtual Primary Master. When all {B, C, D, E} ports are dissociated, you can notice that the internal switch
becomes useless. That’s why the switch named [CAout] automatically switches on, and connects the port {Aout} on the rear
panel.
The goal of the dissociation is the same than before, i.e. merge ES100 and ES-V2 networks and build multiple tunneling
communications. When port {Aout} is activated, you will also be able to build ring architecture. This will be described in the
next paragraph.
As no EtherSound stream can reach the ports when they are dissociated, you will need to plug the control PC to the port {3
rd
}
if you want to remote control your network.
AVM500-ES User’s Manual v2.1 AuviTran 2010 25