AuviTran AVM500-ES Скачать руководство пользователя страница 4

Страница: 4 / 52

AVM500-ES User’s Manual

AuviTran 2010

ELECTRICAL AND ELECTRONIC INTERFERENCES RISKS

This Product uses high frequency digital circuits that

might interfere with electrical or electronic devices placed

in your working environment. Please make sure this kind

of device (television, radio device, cell phones) is
removed in order to ensure a proper functioning of each

device.

•

Always use shielded cables and connectors (serial

port, word clock and EtherSound ports). In the other
case, AuviTran will not guarantee the proper behavior

of the product.

•

Serial port cable must be length < 1m to ensure
proper EMC and interferences behavior.

•

Word clock cable must be length < 1m to ensure
proper EMC and interferences behavior.

LIMITATION OF LIABILITY

In no case and in no way, the provider of this Product

(AuviTran, the distributor or reseller, or any other party

acting as provider) shall be liable and sued to court for
damage, either direct or indirect, caused by and to the

user of the board and which would result from an

improper installation or misuse of the Product. “Misuse”

and “improper installation” mean

installation and use not

corresponding to the instructions of this manual.

Please note that graphics given in this manual (drawings

and schemes) are only examples and shall not be taken

for a real vision of your own equipment configuration.

AuviTran is constantly working on the improvement of the

products. For that purpose, the products functionalities

are bound to change and be upgraded without notice.
Please read carefully the User’s manual as the new

functionalities will be described therein.

Содержание AVM500-ES





















































Результаты поиска

Содержание AVM500-ES

Отзывы:

Похожие инструкции для AVM500-ES

Бренды по названию

Популярные бренды

AuviTran AVM500-ES, Руководство пользователя

Результаты поиска

Содержание AVM500-ES

Отзывы:

Похожие инструкции для AVM500-ES

Бренды по названию

Популярные бренды