5.2.3 Parity
Parity Options: NONE, EVEN, ODD.
Default Parity : EVEN
From the Set-up menu, Use and to select the Parity options.
Long Press to enter the selection routine.
The Parity setting will flash. Use and to choose Parity.
Example shows:
Set Parity: EVEN
And long press for confirmation.
Press to return the main set up menu.
From the main Set-up menu, Use and to select the CT option.
5.3 C.T. (Current Transformer)
Set C.T.2 secondary current input.
Options: 5A or 1A
Default CT2: 5A
Long press to enter the CT2 routine.
Long press , the CT2 setting will flash.
Use and to choose CT2 with 5A or 1A.
5.3.2 C.T. Rate (Current Transformer)
To set the primary current ratio in the meter you must program the divider
into the meter. e.g. to set 200/5 amp input “0040” (Divide the primary by 5)
5 amp being the secondary of the c.t. see section 5.3.3 for the table.
Options: 1~2000
Default CT rate 1. ( New Ratio Must Be Programmed Into The Meter)
Long press to enter the CT Rate routine.
long press , the CT rate setting will flash.
Use and to choose CT rate with 1~2000.
And long press for confirmation
5.3.1 C.T.2 (Current Transformer)
Ph S
ESC
P
PF Hz
MD
P
PF Hz
MD
P
PF Hz
MD
P
PF Hz
MD
E
E
P
PF Hz
MD
E
E
E
E
E
www.autometers.co.uk
10