In
sta
lla
tio
n
an
d
S
pe
cif
ic
ati
on
s
2--7
Installation and Specifications
Power Supply Connections
OP400 series panels r5 VDC input power. An optional 5 VDC external power
supply that plugs into a standard 120 VAC receptacle is available (part no.
OP--PS400). This power supply (or equivalent) is required for configuring your
panel. It is also required for operation
unless
you are using a DL05, DL105, DL205
or DL405 PLC; these products supply 5VDC through the communications cable. All
other PLCs, including the DL305s, Allen-Bradley 5/03, 5/04 and Micrologix, require
the use of an external 5VDC power supply during operation.
NOTE:
Only use a 5 VDC power supply that has a
center negative
DC power jack.
Configuration:
5 VDC Power Supply Required For Configuring
All
400 series panels
5 VDC Power Supply
(Part No. OP--PS400)
OP--CCBL Configuration
Cable
Operation Using a D3--340, D3--350, D3--330 w/DCU, Bottom Port of
DL405 or Allen-Bradley CPU:
5 VDC Power Supply Required
Operation Using a DL05, DL105, DL205, or Top Port
of DL405 CPU:
5 VDC Power Supply Not Required
Communications Cable
Supplies 5 VDC Input Power
