C
on
fig
ur
in
g
Yo
ur
O
pe
ra
to
r
P
an
el
4--6
Configuring Your Operator Panel
Configure the Panel Features
-- Select Configure Panel. These features are
discussed in detail in Chapter 3, but include:
S
Force Option
-- Selecting this option allows the PLC ladder program
itself to write to a pushbutton bit. If alternate action is selected for any of
the pushbuttons, the Force Option should be selected if you want the
capability to force the state of an alternate action pushbutton on or off
without touching the panel.
S
LED Separation
-- The pushbuttons can be configured as either
momentary or alternate action. If momentary is selected for any
pushbuttons, select LED Separation if you want the LEDs inset in all of
the momentary pushbuttons to act independently of the button status.
Save and Download
-- Once you have completed your configuration, you can save
it to disk and/or write (download) directly to the panel.
NOTE:
Be sure to select the correct port on your PC (Com 1, 2, 3, 4) in order to Write
to the Panel.
Step 7
Step 8
