1
EU Information
This product is manufactured in compliance with European Union (EU) Directives and carries the CE
mark. The following information is provided to comply with EU documentation requirements.
NOTE: Products with CE marks
perform their required functions safely and adhere
to relevant standards as specified by EU directives provided they are used
according to their intended purpose and that the instructions in this manual are
adhered to. The protection provided by the equipment may be impaired if this
equipment is used in a manner not specified in this manual. Only replacement parts
supplied by
Automationdirect.com
or its agents should be used. A listing of
international affiliates is available at our Web site:
www.automationdirect.com
.
If you need technical assistance, please call the technical support group at
Automationdirect.com
(3505 Hutchinson Rd., Cumming, GA 30040, U.S.A.)
at
770--844--4200. They are available Monday through Friday from 9:00 A.M. to 6:00
P.M.
Eastern
Standard
Time.
The
Web
Site
address
is
www.automationdirect.com
.
All electrical circuits connected to the communications port receptacle are rated as
Safety Extra Low Voltage (SELV).
Operating Temperature
0
°
to 50
°
C
. . . . . . . . . . . . . . . . . . . . .
Storage Temperature
--20
°
to 70
°
C
. . . . . . . . . . . . . . . . . . . . . .
Operating Humidity
95% (non-condensing)
. . . . . . . . . . . . . . . . . . . . . . . .
Air Composition
No corrosive gases permitted
. . . . . . . . . . . . . . . . . . . . . . . . . . .
No preventative maintenance is required. To clean the exterior of the panel
disconnect the input power and carefully wipe the panel with a cloth moistened with
plain water.
There are no internal fuses for the input power circuits, so external circuit protection
is needed to ensure the safety of service personnel and the safe operation of the
equipment itself. To comply with EU specifications, the input power must be fused.
Use a fuse rated at
twice
the input current rating of the panel. For example, if the
panel has an input current rating of 0.5 amperes, use a fuse rated for 1 ampere.
Technical Support
SELV Circuits
Environmental
Specifications
Preventative
Maintenance and
Cleaning
External Fuse
Protection
for Input Power
