background image

P L E A S E   R E A D   T H E S E   I M P O RTA N T  S A F E T Y  R U L E S  

Failure to comply with the following Safety Rules may result in  

Serious Personal injury and/or Property Damage. 

For 

ADDITIONAL SAFETY 

protection we 

STRONGLY RECOMMEND

 the fitting of a 

Photo Electric Beam to your Garage Door and 
Opener. In most countries Photo Electric Beams are 

MANDATORY

 on all Garage Doors fitted with 

Automatic Openers. For the small additional outlay 
ATA strongly recommend that Photo Electric 
Beams be fitted to your Garage Door Opener insur-
ing 

ADDITIONAL 

safety and peace of mind  

 

DO NOT 

operate the Garage Door Opener unless 

the Garage Door are in full view and free  from    
objects  such  as  cars  and  children/people  .            

SERIOUS PERSONAL INJURY 

and/or property 

damage can result from failure to follow this     
warning. 
 

DO NOT

 operate the Garage Door Opener when 

CHILDREN/PERSONS 

are  near  the  door.       

Children must be supervised near the Garage Door 
at all time and when the Gate Opener is in use. 

SE-

RIOUS PERSONAL INJURY 

and/or property 

damage can result from failure to follow this     
warning 
 

DO NOT 

allow children to operate the Garage 

Door Opener. 

SERIOUS PERSONAL INJURY

 

and/or property damage can result from failure to 
follow this warning. 
 
Make sure that the 

REVERSING SENSITIVITY

 

is adjusted correctly on installation so that the door 
reverse to the opening position when obstructed 
with 

MINIMUM PRESSURE 

and stops on 

 

 

 

 

opening cycle when obstructed with 

MINIMUM 

PRESSURE

. Failure to adjust this setting properly 

and in accordance with the Installation could result 
in   

SERIOUS   PERSONAL   INJURY  

and / or   

property damage. This test must be  repeated at 
regular intervals and the necessary adjustment 
made if     required. 
 

DO NOT 

disengage  The Garage Door Opener to 

manual operation with children/persons or any 
other objects including motor vehicles within the       
doorway. 

Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties Statutory or 
otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia SecruaLift Opener and Automatic Tech-
nology Australia Pty Ltd hereby further expressly excludes all or any liability for any injury damage, cost, expense or claim whatsoever suffered by any person as 
a result whether directly or indirectly from failure to install the Automatic Technology Australia Door Opener in accordance with these installation instructions. 

Install wall switch in a 

LOCATION/POSITION 

out of 

reach of children at all time and where the Garage Door 
is visible. 
 
The Garage Door must be 

WELL BALANCED

.      

Sticking   or   binding   door   must   be  repaired  by  an  
experienced    service   door  installer  prior  to  operator 
 installation. 

DO NOT 

attempt to repair the Garage Door 

yourself as the hardware is under extreme weight and ten-
sion and could cause 

SERIOUS PERSONAL INJURY 

and/or property damage. 

 
REMOVE OR DISENGAGE 

all Garage Door locks 

prior to installation or the Garage Door  
Operation. 
 
Connect the Operator to a properly 

EARTHED

 general 

purpose 240V outlet installed by a qualified Electrician. 
 

DISCONNECT

 the 

POWERCORD

  from  the    mains      

before making any repairs or removing the covers! Only 

EXPERIENCED

   Service   Personal   can   remove  the  

covers from the operator. 
 
Keep hands and any loose clothing well 

CLEAR

 of the 

Door and Garage Door Opener at all time. 
 
When using the Auto Close mode a 

PHOTO         

ELECTRIC BEAM 

must be correctly fitted and tested 

for     operation    at    regular    intervals.    

EXTREME  

CAUTION 

is recommended when using the Auto Close 

mode. All the 

SAFETY RULES 

must be followed. 

 
In   order   for  the  Garage  Door  Opener  to 

SENSE

 an  

object obstructing the doorway, some 

FORCE

 must be 

exerted on the object. As a result the object may suffer 
some 

DAMAGE

, the extent of which is depending on the 

force adjustment set during installation. 
  
Make sure the door is fully open before driving into or 
out of the garage. 
 
Make sure the door is fully closed before leaving the 
driveway. 

Содержание SECURALIFT




















Отзывы: