Automatic Technology SECURALIFT, Инструкция по установке и руководство пользователя

Страница: 18 / 19

FA U LT S A N D R E M E D I E S
SYMPTOMS POSSIBLE CAUSES REMEDY
* Door will not operate *Main power not turned on
*Door is obstructed *Turn on
*Remove obstruction
*Door is locked or motor jammed *Unlock door and Inspect door and
re-move jam
*Door will not reverse when obstructed *Door needs to be re-initialised Fully close the door and press the Reset
button (refer installation instruction step
16.4)
*Door moves downwards and
reverses itself upwards Adverse weather conditions (wind or cold)
causing door to stiffen and become tight in
tracks.
There could be an obstruction in door way.
Increase the force pressure and / or re-
initialise the door (refer installation in-
struction step 16)
*Door operates from drive unit but
not from hand transmitter *Indicator on transmitter not lighting
*Code not store in controlled receiver
*Drive unit antenna wire not extended
*Antenna touching something metal
*Battery flat
*Radio interference *Battery flat or battery lead broken
*Refer to installation instructions step 17
*Extend antenna wire
*Reposition antenna
*Replace battery
*Return operator to place of purchase for
frequency upgrade (charges apply)
*Door does not close fully *Limit micro switch incorrectly
adjusted *Re-adjust limit switch (refer
installation instruction – step 15)
*Door does not open fully *Limit micro switch incorrectly
adjusted *Re-adjust limit switch (refer
installation instruction – step 15)
*Lights malfunction
*Globe blown *Replace globe. Replace with Edison type
240V 60W reinforced construction globe
only
*Globes keep blowing *Incorrect globe *Replace globe. Replace with Edison type
240V 60W reinforced construction globe
only
17
IMPORTANT NOTICE – MAINTENANCE INFORMATION
YOUR GARAGE DOOR OPENER SHOULD BE SERVICED BY AN EXPERIENCED SERVICE
PERSON. THE MOVING PARTS (WORM DRIVE ETC.) NEED TO BE LUBRICATED WITH
HIGH PRESSURE GREASE EVERY 12 MONTHS AND OTHER CRITICAL ADJUSTMENTS
(REVERSING SENSITIVITY, LIMITS ADJUSTMENTS ,ETC) CHECKED AND ADJUSTED
WHEN REQUIRED AS PER THE INSTALLATION MANUAL