Owner Installation Instructions
Easy Slider - Sliding Gate Opener
9
Drive unit installation
The ATA EasySlider sliding gate opener is designed to operate most residential sliding gates. The gates must
be in good working condition and should operate freely by hand.
Step 1. Initial checking
Before commencing installation of the Easy Slider sliding gate opener, check the following:
1. The gate moves freely and easily by hand for the full opening and closing travel.
2. The mounting must be solid construction (concrete, brick or steel. It must be able to withstand the full force
applied to the gate.
3. Select a suitable location for mounting the drive unit. This position is usually established by opening the gate
fully and mounting the drive unit within a suitable distance of the gate edge.
4. A weather-proof 240V 10Amp power outlet is located within one (1) metre of the master drive unit’s mounting
point.
5. If dual gate openers are required provision for underground cabling should be made from one side of the
gateway to the other. This may also be required for wiring of Photo-Electric Beams or other accessories.
02
fig
Cover release screw
Disengage lever
Cover release screw
