30
Easy Slider - Sliding Gate Opener
Owner Installation Instructions
Once the list is displayed it can be sorted by Store
number, ID Label or Serial Number. Use NEXT or PREV
button to select sorting method.
NOTE:
When sorting by ID label or S/N, only stored
transmitters locations are displayed.
Step 2. Navigating the list
1. Press UP or DOWN buttons to navigate through
list
(Fig. 50)
.
2. Press SET to display menu of available functions.
NOTE:
Holding a button down will step through the
list faster.
Selecting an operation
Press NEXT or PREV to cycle through four menu
options
(Fig. 51 -54)
. Press EXIT to return to the list.
Press SET to execute the menu’s operation.
Code operation (location empty)
If the code operation is selected on an empty
transmitter location, the BASIC CODE TRANSMITTER
PROCEDURE will be initiated with the transmitter
being saved in the selected location. This is useful
when managing transmitters using a scheme which ties
the store location to the transmitter’s owner.
Code operation (location used)
If the code operation is selected for a location that
already contains a transmitter, then the BASIC CODE
TRANSMITTER PROCEDURE will be initiated and the
new transmitter will replace the existing one. Note
that the button functions and name of the existing
transmitter will be transferred to the new transmitter.
This procedure is of great convenience when replacing
a lost transmitter.
Delete operation
The delete operation is used to remove a transmitter
from memory along with the name and button function
settings.
Edit operation
The edit operation displays the transmitter record
for editing purposes. See TRANSMITTER EDIT
PROCEDURE for details.
Copy operation
The copy operation is used to code multiple transmitters
with the same button function as that of the selected
transmitter. Once selected an abbreviated code set routine
is initiated which repeats steps 2 & 3 of the BASIC CODE
TRANSMITTER PROCEDURE for each transmitter to be
coded. Coding is terminated by pressing the EXIT button.
Exiting the list
To exit the transmitter list simply press EXIT to return
to the Code
Transmitter management
�� � � �
�� � � �
� �
� �
� � � �� � �
�� � � � � � �� � ��
�
50
fig
52
fig
53
fig
�� �� � � �
� � � �
� � �
� �
�� �� � � �
�� � � � � � � �
� �
51
fig
�� �� � � �
� � � �
� � �
� �
�� �� � � �
� �� �
� � �
� �
54
fig
