Autodesk AUTOCAD ELECTRICAL 2005, Начало работы

Страница: 12 / 88

8
|
Chapter 1 Wires
About Wires
An AutoCAD Electrical wire is an AutoCAD line entity on an AutoCAD
Electrical wire layer. The wire layer for a new wire segment is determined by:
■ Wires that begin or end in space or begin and end at a component
connection point, are put on the current layer (if it's a wire layer) or on
the first wire layer AutoCAD Electrical finds in a layer name search.
■ Wires that begin at an existing wire take on the same layer as the
beginning wire.
■ Wires that begin in space or at a component and end at an existing wire
take on the layer of the ending wire.
Inserting Wires
You can start or end a wire segment in empty space, from an existing wire
segment, or from an existing component. If you start from a component, the
wire segment snaps to the wire connection terminal closest to your pick
point on that symbol. If the wire segment ends at another wire segment, a
DOT (block name
wddot.dwg ) is applied if appropriate. If it ends at another
component, the segment connects to the wire connection terminal closest to
your pick point on that symbol.
To insert single phase wiring
1 Click the Project tool to open the aegs project.
Menu Projects
➤
Project
➤
Project New/Existing
2 In the Project dialog box, Project Drawing List section, double-click
demo04.dwg to open the drawing.
3 Zoom in on the upper left corner of the drawing.
4 Click the Add Rung tool.
Menu Wires
➤
Add Rung